Injection Molding

Technical guides to plastic injection molding processes, production cost, cycle time, defects and process selection. Explore conventional and specialist routes and the inputs that shape molded-part production.

Process capability Cpk study with measured parts and a blurred histogram
October 6, 2026

Process Capability Cpk: Calculation and Acceptable Values

Process capability Cpk explained: Cp, Cpk, Pp and Ppk, how to calculate Cpk, acceptable values, valid studies and how to improve capability….

Read More…

Purging compound cleaning the barrel of an injection molding machine
October 5, 2026

Purging Compound: Types and How to Purge Effectively

Purging compound for injection molding: types, when to use it, effective purging, hot runner purging, preventing black specks and records….

Read More…

Mold temperature controller connected to an injection mold

Mold Temperature Controller: Types, Sizing and Setup

Mold temperature controller guide: water and oil types, sizing capacity, circuit connections, setting and monitoring temperature and maintenance….

Read More…

Operators measuring the same parts for a gauge R&R study
October 4, 2026

Gauge R&R: How to Run and Read the Study

Gauge R&R explained: why it matters for precision parts, how to run a study, %GRR and ndc, causes of poor results and how to improve them….

Read More…

Engineers reviewing a process FMEA worksheet for a molded part
October 3, 2026

PFMEA Step by Step for Molding and Machining

PFMEA explained: link to process flow and control plan, step-by-step method, severity, occurrence and detection, examples and supplier use….

Read More…

Technician applying mold release agent lightly to an open injection mold cavity

Mold Release Agent: Types, Problems and Alternatives

Mold release agent in injection molding: types, when to use it, problems it causes, fixing sticking without spray and how to control its use….

Read More…

Engineering change order review of a molded part and its mold insert
September 26, 2026

Engineering Change Order (ECO): Workflow and Validation

Engineering change order for molded parts: contents, workflow, mold impact, validation, revision control and packaging or color changes….

Read More…

Injection molding holding pressure adjusted at the machine control panel
September 25, 2026

Injection Molding Holding Pressure and Hold Time Setup

Injection molding holding pressure: what it does, how to set pressure and hold time with a gate freeze study, effects on quality and screw recovery….

Read More…

Overmolding design guide: TPE grips overmolded on rigid tool handles

Overmolding Design Guide: Materials, Retention and Walls

Overmolding design guide: material pairing, mechanical retention, wall and edge rules, substrate tolerance and preheating, delamination and peel tests….

Read More…