Injection Molding

Technical guides to plastic injection molding processes, production cost, cycle time, defects and process selection. Explore conventional and specialist routes and the inputs that shape molded-part production.

Insert molding process: brass threaded inserts loaded into an open mold
September 24, 2026

Insert Molding Process: Insert Prep, Movement and Testing

Insert molding process: steps, insert preparation, preventing insert movement, thread protection, pull-out and torque testing and quality control….

Read More…

Injection molding defects and solutions: defect samples laid out for troubleshooting

Injection Molding Defects and Solutions: How to Get Best Results

Injection molding defects and solutions: a troubleshooting map of filling, shrinkage and surface defects, a structured method and prevention….

Read More…

Flow marks in injection molding: ripples and bands on a black molded part
September 23, 2026

Flow Marks in Injection Molding: How to Get Best Results

Flow marks in injection molding: types, causes, how to read them to locate the issue, and process, tool, design and material fixes….

Read More…

Gate blush injection molding: dull halo around the gate on a glossy black part
September 22, 2026

Gate Blush Injection Molding: Causes and Fixes

Gate blush injection molding marks: what they look like, causes, how to tell them from similar defects, and process, tool and material fixes….

Read More…

Warpage plastic: bowed molded cover on a surface plate showing a gap
September 20, 2026

Warpage Plastic Parts: Causes and How to Diagnose Them

Warpage plastic parts: find the driver among cooling, wall thickness, fiber orientation, packing and material, then fix and measure it….

Read More…

Jetting injection molding: snake-like flow mark near the gate of a clear part
September 17, 2026

Jetting Injection Molding Defects: Causes and Fixes

Jetting injection molding defects: why jetting happens, tracing it to the gate, tool fixes such as tab and fan gates, and process fixes….

Read More…

Short shot injection molding: incomplete molded part beside a complete part
September 16, 2026

Short Shot Injection Molding: Causes and Related Defects

Short shot injection molding: how to investigate before raising pressure, and what burn marks, black specks, voids and delamination reveal….

Read More…

Injection molding flash: thin plastic fin along the parting line of a molded part

Injection Molding Flash: Tool, Press or Process?

Injection molding flash: how to trace it to the tool, press or process, diagnose it quickly and prevent it in production….

Read More…

Splay in injection molding: silver streaks on a black molded part near the gate
September 14, 2026

Splay in Injection Molding: How to Diagnose the Cause

Splay in injection molding: how to separate moisture splay from shear, degradation and contamination marks, diagnose quickly and prevent it….

Read More…