Injection Molds

Injection mold engineering guides covering cavity and runner choices, mold materials, cooling, surface specifications, maintenance and inspection. Use these articles to understand tooling decisions before specifying a custom mold.

A coolant channel follows the contour of a mold cavity in a schematic cross-section
November 5, 2026

Conformal Cooling: 9 Checks Before You Build Your Mold

Conformal cooling succeeds when geometry, material, flow, trials, and maintenance align. Use these nine checks to prepare a stronger mold RFQ….

Read More…

Orange gas-flow arrow passes through a narrow vent land and wider relief on a navy engineering grid.
October 29, 2026

Injection Mold Venting: 9 Essential Tooling Checks

Injection mold venting gives displaced air and process gases an escape path as melt fills the cavity. Good vent placement and a…

Read More…

Side-gate flow paths divide around a core on a navy engineering grid.
October 28, 2026

Injection Molding Gate Types: A Practical Design Guide

Injection molding gate types determine where resin enters a cavity and how that entry affects the gate mark, fill path, and trimming…

Read More…

Mold designer working on a 3D injection mold design at a workstation
October 15, 2026

Injection Mold Design Software: How to Pick the Best One

Injection mold design software guide: CAD systems like NX and SolidWorks, Moldflow simulation, CAM and EDM tools, file formats and what buyers need to send….

Read More…

Several types of injection molds lined up in a mold workshop

Types of Injection Molds: How to Pick the Best One

Types of injection molds explained: two-plate and three-plate, cold and hot runner, multi-cavity and family, unscrewing, 2K and insert molds, and how to choose….

Read More…

Injection mold running in a molding machine with a cycle counter on the mold plate
October 14, 2026

Shot Count and Mold Life: Tracking and Extending It

Shot count guide for injection molds: what it means, how counters track it, typical mold life, what shortens it, maintenance intervals and life targets….

Read More…

Sinker EDM machine applying a matte texture to a mold cavity

VDI 3400 Texture Chart: Grades and Draft Requirements

VDI 3400 texture guide: chart of grades and Ra values, how EDM texture is made, draft by grade, VDI vs SPI finishes and how to specify it on drawings….

Read More…

Hardened multi-cavity production injection mold on an assembly bench

SPI Mold Classification: How to Pick the Best One

SPI mold classification explained: Class 101 to 105 cycles, steel and hardness rules, how to choose a class, cost effects and how to state it in an RFQ….

Read More…

Technician laser welding a mold insert during injection mold repair
October 13, 2026

Injection Mold Repair: Methods, Process and Prevention

Injection mold repair guide: common damage, welding and replacement methods, repair process, prevention, when to rebuild and planning support….

Read More…