Injection Molds
Injection mold engineering guides covering cavity and runner choices, mold materials, cooling, surface specifications, maintenance and inspection. Use these articles to understand tooling decisions before specifying a custom mold.
Soft Tooling vs Hard Tooling: How to Pick the Best
Soft tooling vs hard tooling: materials, tool life, SPI classes, cost and lead time, part quality, when to choose each and mixed options….
Bridge Tooling: When It Makes Sense and What It Costs
Bridge tooling explained: what it is, when to use it, how it differs from prototype and production molds, steel, cost, timing and next steps….
Clamping Force Calculation with a Worked Example
Clamping force calculation for injection molding: formula, projected area, cavity pressure by resin, worked example, press checks and simulation….
Cold Runner Systems: Cross-Sections and Balancing
Cold runner systems explained: parts, cross-sections, balancing, two-plate vs three-plate, pros and cons, and when to choose a hot runner….
Core Pin Design: Types, Materials and Cooling
Core pin guide: what core pins do, types, materials, design rules, cooling and venting, relation to the mold cavity, specs and maintenance….
Plastic Mold Making Process: From Design to Trials
Plastic mold making step by step: DFM, design, machining, EDM, polishing, fitting, trials, approval, lead time and export packing….
Mold Base: Parts, Types, Standards and Sizing
Mold base explained: parts, two-plate and three-plate types, LKM, HASCO, Meusburger and DME standards, plate steels, sizing and how to specify….
Tool Steel Grades: How to Pick the Best One
Tool steel grades explained: W, O, A, D, S, H, M and P groups, properties, grades for molds, dies and tools, and how to choose and specify them….
P20 Steel for Molds: Uses, Machining and Limits
P20 steel explained: grades, 718H, properties, uses in molds, machining and polishing, limits, comparison with H13 and how to specify it….