Injection Molds

Injection mold engineering guides covering cavity and runner choices, mold materials, cooling, surface specifications, maintenance and inspection. Use these articles to understand tooling decisions before specifying a custom mold.

Hardened H13 steel mold insert being finished on a surface grinder
October 11, 2026

H13 Tool Steel: Properties, Heat Treatment and Uses

H13 tool steel explained: composition, properties, heat treatment, uses in die casting dies and mold inserts, machining, comparisons and specs….

Read More…

Technician fitting ejector pins into the ejector plate of a small injection mold

Ejector Pins: Types, Materials, Fits and Placement

Ejector pins in injection molds: types, materials, sizes and fits, placement rules, common problems and how to specify and replace them….

Read More…

Mirror-polished 420 stainless steel cavity insert for a clear lens mold

420 Stainless Steel for Molds: Properties and Polishing

420 stainless steel explained: composition, hardness, heat treatment, S136 and 1.2083 mold grades, machining, polishing, uses, limits and specs….

Read More…

Mold design engineer reviewing a 3D injection mold layout beside a small open mold

Injection Molding Tool Design: Inputs, Layout and Gating

Injection molding tool design explained: inputs, cavity layout, parting line, gates and runners, cooling, ejection, undercuts, steel and design review….

Read More…

Collapsible core in an injection mold for internally threaded caps
October 9, 2026

Collapsible Core: When to Use It and Design Rules

Collapsible core in injection molds: how it works, when to use it, vs unscrewing and stripping, design limits, witness lines, care and specs….

Read More…

Sprue bushing installed in an injection mold clamp plate

Sprue Bushing: Key Dimensions, Materials and Sprue Design

Sprue bushing guide: key dimensions, matching the machine nozzle, materials, why sprues stick or leak, hot sprue bushings and how to specify….

Read More…

Ejector sleeve and core pin set for an injection mold
October 8, 2026

Ejector Sleeve: When to Use It and Design Rules

Ejector sleeve guide: what it is, when to use one, design rules, fits and materials, common problems, maintenance and how to specify sleeves….

Read More…

Toolmaker doing mold polishing on a cavity insert with diamond paste
October 7, 2026

Mold Polishing: Standards, Methods and Steel Choice

Mold polishing guide: SPI and VDI finish standards, polishing steps, steels that polish best, polishing direction, protection and specs….

Read More…

Mold inserts removed from a precision injection mold base

Mold Inserts: Steels, Fitting, Locking and Cooling

Mold inserts in injection molds: why they are used, insert steels, fitting and locking, cooling, interchangeable inserts, maintenance and specs….

Read More…