Materials & Part Design

Guides to plastic materials and molded-part design, including polymer comparisons, resin selection, draft, wall thickness, ribs, threads and shrinkage. Relate material behavior and geometry to the requirements of your component.

Polyethylene injection molding: HDPE caps, LDPE lids and a crate corner
September 17, 2026

Polyethylene Injection Molding: Grades, Shrinkage, Warpage

Polyethylene injection molding: LDPE, LLDPE and HDPE grades, melt flow and ESCR, part design, shrinkage and warpage, and what to specify….

Read More…

Glass filled nylon: black molded brackets and housings in PA66-GF
September 15, 2026

Glass Filled Nylon: Fiber Orientation, Moisture and Fits

Glass filled nylon parts: fiber orientation planning, warpage, moisture and dimensional change, press fit tolerances and surface fiber marks….

Read More…

Ultrasonic welding plastic: horn pressing two molded housing halves in a fixture
September 13, 2026

Ultrasonic Welding Plastic: Joint Design and Materials

Ultrasonic welding plastic parts: material choice, energy director and shear joint design, dimensional variation control and weld testing….

Read More…

PVC injection molding: rigid grey PVC pipe fittings and flexible PVC plugs
September 12, 2026

PVC Injection Molding: Grades, Tooling and Common Defects

PVC injection molding: rigid and flexible grades, part design, corrosion-resistant molds and screws, common defects and supplier questions….

Read More…

PET injection molding: clear PET preforms and glass-filled PET housings on a bench

PET Injection Molding: Grades, Drying and Mold Temperature

PET injection molding: grades, moisture control, mold temperature for clear or crystalline parts, part design, defects and quote inputs….

Read More…

PEEK injection molding: tan PEEK molded parts beside a heated mold
September 11, 2026

PEEK Injection Molding: Grades, Design and Process

PEEK injection molding: grades, part design, mold and process temperatures, crystallinity checks, annealing, machining and quote inputs….

Read More…

Nylon 6 vs nylon 66: black glass-filled and natural nylon molded parts
September 10, 2026

Nylon 6 vs Nylon 66: How to Pick the Best One Without Waste

Nylon 6 vs nylon 66 for molded parts: heat resistance, strength and toughness, moisture, molding differences, surface finish and how to choose….

Read More…

TPU injection molding: flexible molded TPU seals, cable strain reliefs and a small wheel
September 9, 2026

TPU Injection Molding: Design, Drying and Mold Tips

TPU injection molding guide: hardness selection, part geometry, fit and tolerances, drying, mold design and overmolding TPU onto rigid plastics….

Read More…

Acetal homopolymer vs copolymer parts: white and black molded POM gears, clips and bushings
September 7, 2026

Acetal Homopolymer vs Copolymer: How to Pick the Best

Acetal homopolymer vs copolymer for molded parts: strength, creep, wear, hot water and chemicals, temperature, molding shrinkage and how to choose….

Read More…